JDSU Acterna T-BERD 107A T-Carrier Analyzer

JDSU Acterna T-BERD 107A T-Carrier Analyzer

Welcome to a Biomedical Battery specialist of the Acterna Battery

Reduce Setup Time
The automatic configuration feature immediately determines the proper framing and pattern so the technician can quickly monitor live circuits.

Test Full T1 Span
Error and signal analysis can be performed at any point along a T1 span, including repeater input. This instrument with battery such as JDSU GPDR204 Battery, JDSU LI204SX Battery, JDSU MTS-6000 Battery, JDSU LI204SX-60A Battery, JDSU LI204SX-66A Battery, JDSU LI204SX-60 Battery, HP VA7100 Battery, HP VA7110 Battery, HP VA7400 Battery, HP VA7410 Battery, Biocare ECG-9803 Battery is ideal for full installation and maintenance testing along T-Carrier spans.

Reduce Testing Time
Qualify T1 spans at the touch of a button with the automated BRIDGTAP and MULTIPAT� tests developed by TTC. These automated test patterns eliminate the need for individual tests.

Troubleshoot Equipment Problems
Emulate the customer premises channel service unit (CSU) and network interface unit (NIU) from the span to isolate the toughest problems.

Identify Timing Problems
Quickly identify network synchronization problems between equipment and a reference signal with the timing slip measurement.

Monitor VF Channels
Listen to individual channels and monitor data and ABCD signaling bits on all 24 channels when troubleshooting DSO problems. Measure VF level, frequency, and quality with the channel monitor feature.

Verify Fractional T1 Service
Use the Fractional T1 Option to perform bit error rate tests on selected channels to verify transmission quality on contiguous and noncontiguous FT1 bandwidths. Insert VF tones on single DSO channels.

Combine Convenience with Power
Flash memory technology enables complete field software upgrades in minutes. Battery operated, rugged, and lightweight (4.5 lb.), this test set is ideal for the field service technician.